By 
To check how you look, you must have a mirror. It is put in places like the entryway, the living room, and the bathroom. But as you use it, you start to think about how dull and dirty it is.
Mirrors are extremely fragile. They are easy to damage on the outside, and if you don’t treat them with care, they break. If a broken mirror was in a closet,.
Here are some tips on how to clean your mirrors and products that will help you look your best.
If you worry about polishing marks on a mirror
You can’t just wipe the mirror lightly with a tissue to get rid of the cloudy dirt on it.
But if you do that, the dirt will leave a faint mark after wiping, and fine fibers of the dishcloth will be left behind.
To solve this kind of problem, the “choice of tools” is very important. Use the tools and cleaning methods we’ll show you below to get it clean and shiny.
What tools do you need to polish a mirror?
- Room mirror
- 2 microfiber cloths
- Neutral dishwashing detergents
In the case of mirrors around the water
- 2 microfiber cloths
- A cleanser such as a Jiff
- Wrap
The mirrors in your room are covered with dirt and dust, so detergent and a cloth are all you need.
We recommend using a microfiber cloth made of thin synthetic fibers for wiping. It leaves no loose threads so that you can get a nice finish. Even 100 yen is easy to get, so let’s prepare it.
How do I clean it, so it shines?
The best way to polish a mirror is to “rub in a circle and wipe off in a U-shape.” Even without force, the dirt will come off, and you can make it shine again.
How to clean a room’s mirror
Most of the marks on the mirror in the room are oil stains, like fingerprints. Dishwashing detergent that has been diluted can be used to get rid of it.
(1) Soak the cloth in soapy water.
Add a few drops of detergent to 500ml water and squeeze the cloth well.
(2) Move the polisher in a circle.
Use a cloth that has been squeezed hard to clean the mirror. The trick is to rub lightly and not too hard.
(3) Use water to wipe.
Rinse the cloth once, wring it out well, and then use the same method to wipe it with water.
(4) Wipe it dry to finish.
To finish, wipe in a U-shape from the top down with a dry cloth. By polishing in a U-shape, you can ensure that the brush is even and doesn’t leak.
How to make a mirror shine around water
When water splashes on and dries on mirrors near the water, it leaves behind marks called “limescale.” You can’t remove this stain with dish soap, so use a cleanser like “Jif” to polish it.
(1) Remove limescale with cleaner and plastic wrap.
Use a crumpled piece of plastic wrap with cleanser on it to polish gently in a circular motion.
(2) Wipe with a little water
Wipe off the liquid cleaner with a cloth that has been squeezed full of water.
(3) Wipe dry
Wipe away the water with a dry cloth in a U-shape to finish. Water spots on the mirror can be scraped off with the cleaner’s small granules.
After polishing the mirror: Protect it
After you polish the mirror, you can keep it from getting dirty again and save yourself the trouble of cleaning it again. It’s easy to do with things you already have at home, so try it while you clean.
Put shaving cream on the mirror in the bathroom.
If your shaving cream has the right amount of oil, it will coat the mirror. You must put the cream on the dry-wiping cloth and spread it out evenly.
If you put a coating on it, water won’t be able to stick to it, even if it accidentally flies at it.
Use the anti-fog spray on mirrors.
It is also suggested that you buy anti-fog spray and put it on the mirror in the bathroom. This makes it, so you don’t have to clean the mirror as often, and it also makes the mirror last longer.
Mirror softener for the room
There are things in fabric softeners that stop static electricity from happening. So, dust won’t stick to the mirror if you put fabric softener on it.
Just wipe it down with about 2–3 drops of softener in 500 ml of water. Having a faint scent in your room is nice.
Mirror polishing brightens a room
- Many people think they need to improve at polishing mirrors because it takes a lot of skill.
- But you can clean it easily and quickly with microfiber cloths and other commercially available cleaning tools.
- A clean mirror makes the room look brighter and bigger by reflecting light.
Proper care
We went over how to fix a scratch on a mirror or piece of glass. After treating the surface, wipe it down with a good detergent and dry it with a paper towel, napkin, or dry cloth. And taking good care of the product is important to keep it from breaking and make it last longer.
Use these care rules to make the accessory shine and keep the reflection clear:
- Regular dust removal: Use hot water, a soft cloth, or a patch of microfiber and nylon.
- Compositions that stand out: Buy products made especially for cleaning mirrors that aren’t harsh.
- Polishing: Before you do it, make sure to use a circular motion to get rid of dirt and dust. If you don’t, abrasive particles could scratch the surface and make it look dull.
- Foam for shaving: If you put it on the surface and polish it, the accessory won’t fog up, and the streaks will disappear.
If you take care of the mirror regularly and well, you won’t have to worry about scratches or small chips. For the process, you can use products from home or from a store to make the surface look great.
So, that’s all, if you follow these instructions, your mirror will look great.
