By 
Washstands used for washing hands, brushing teeth, washing face, and checking personal appearance are full of soap scum, water stains, and sebum. If left unattended, these stains can become yellowish, blackened, and reddish mold, so care should be taken.
However, since each part of the washbasin, such as the faucet, washbowl, and drain, gets dirty differently, many people do not know what kind of cleaning tools they need or how to clean them.
In this section, we will introduce the methods and tools for cleaning washstands and how to remove stains such as yellowing and blackening.
Types of Stains on Washstands
Washstands used for various purposes are subject to stains such as yellowing, blackening, red mold, and water stains caused by detergents, cosmetics, and other stains.
The following are the causes of washstand stains and points to keep in mind.
Yellowing
The yellowing of washstands is caused by soap scum, sebum, and mold.
In particular, if water, toothpaste, soap scum, etc., are left untreated, the washstand will quickly turn yellow.
To prevent yellowing, it is essential to clean the stains and wipe off the water every time. If it is too much trouble to wipe it off every time, please decide to wipe it off once a day.
Blackheads
Black stains stick to the caulking material connecting the washbasin and the wall and to the joints of the tiles. Black colors may spread to the entire washbasin ceramic if left without cleaning.
The blackening results from mold fungi floating in the air that have fallen onto the washbasin and grown using soap scum, sebum, and other dirt on the washbasin as a source of nutrients. Once stuck to the surface, it is a stain that is difficult to remove.
Water stains
Water stains are white scaly stains on faucets and mirrors. If the washbasin is rough, the accumulated water stains are petrified.
Water stains are the hardened residue of tap water’s minerals, calcium, and other substances. When they evaporate on the washbasin, they remain as white water stains.
Oil stains from hand stains and cosmetics
Since washstands are used daily, hand stains can appear on faucets, mirrors, and other surfaces.
Also, fine droplets of hair styling products and cosmetics that fly off when used on the washstand can cause stains if left unattended.
How to Clean a Washbasin
Here we will show you how to clean each part of the washbasin, such as the faucet and drain. First, let’s start with the cleaning tools you need to prepare.
Washstand Cleaning Tools
Since water stains, sebum, and oil stains are common on washstands, it is helpful to have acidic and alkaline detergents such as citric acid and baking soda.
Also, if there are stubborn water stains or rust stains, please prepare special cleaning agents.
Necessary tools
- Unnecessary cloth
- Melamine sponge
- Toothbrush
- Tissue
- Citric acid
- Baking soda
- Alcohol disinfectant spray
If the washbasin has an outlet, tape or otherwise clean the outlet to prevent water from getting into it.
Faucet
The faucet of a washbasin is stained with sebum and water stains caused by hand stains. Since hand stains and water stains are opposite, different detergents are used to clean them.
How to Remove Hand Stains
First, spray the faucet with baking soda spray to remove hand stains. Focus on the areas where the colors are bothersome.
Next, polish the faucet thoroughly with a sponge. Be careful not to scrub too hard, as this will scratch the surface.
Finally, wipe dry with a cloth to complete the process.
How to Make Baking Soda Spray
Baking soda spray can be easily made by mixing 200 ml of water with two teaspoons of baking soda. Put the mixture in a spray bottle and use it.
Next, spray the stained area with a citric acid spray to remove the water stain. Then, polish with a sponge.
Finally, wipe it off with a dry cloth to make it dry, and you are done.
Wash Bowl
Washbasin bowls are prone to water and black stains, as well as red mold and rust caused by soap scum that was not flushed away.
Apply citric acid spray to water stains and black stains on the washbowl, wrap the washbowl with plastic wrap and leave it for 2 to 3 minutes.
Then remove the plastic wrap and wipe off the water with a dry cloth.
If the black stain does not come off cleanly, sprinkle some baking soda, which has an abrasive action, on the surface before wiping.
How to Clean Mold and Rust
Mold on the washbowl can be removed by simply brushing it lightly with baking soda. And it can also scrape the rust off!
To clean it specifically, take baking soda paste on a toothbrush, apply it to the stain you are concerned about, and scrub it off.
The best amount is about the same as you would put on toothpaste. After that, rinse the baking soda with water, wipe off the water with a dry cloth, and you are done.
Baking soda paste
We will now introduce how to make baking soda paste. First, mix baking soda and water in a 3:1 ratio. The baking soda paste should be the consistency of the pancake batter.
Drain
A washbasin drain is covered with dirt such as hair, soap scum, and mold.
If the dirt is left untreated, it will become a slimy stain due to bacterial growth, so we recommend cleaning it as soon as possible.
First, remove hair, soap scum, dust, and other debris with a sponge or toothbrush to clean the drain.
Next, sprinkle one-half cup of powdered baking soda over the drain. Then pour citric acid water (1/2 teaspoon citric acid dissolved in 100 ml water) over the baking soda.
Pour off the baking soda and citric acid water with water.
When the water is gradually poured over the stains, a chemical reaction occurs between the two, producing carbon dioxide, which forms bubbles. These bubbles will remove dirt.
After the bubbles appear, leave it for 5 to 20 minutes, and finally, rinse off the stains with hot water to complete the process.
Any remaining dirt is scrubbed with a sponge or toothbrush and rinsed off.
